3/8″ by 20’ Grade 70 Transport Chain with Two Grab Hooks Assembly


Equipment Supply’s 3/8-inch x 20-foot Grade 70 Chain Assembly with Grab Hooks is the heavy-duty standard for anyone in the cargo control industry. Engineered with a working load limit of 6,600 Lbs. / 3,000 Kgs., this gold dichromate heat-treated carbon steel is designed to be more durable for stabilizing your large loads.

This convenient chain assembly comes pre-cut with the forged alloy steel Clevis Grab Hooks already installed, so it is ready to be used fresh out of the barrel. The hooks are sturdy enough to slip onto your anchor point and stay there throughout transit to keep your load steady and secure.

This Grade 70 Transport Chain Assembly is not designed for overhead lifting. All of our Chain Assemblies are manufactured to meet with the National Association of Chain Manufacturers’ standards. This Grade 70 chain is stamped with a 70 in addition to the manufacturer’s identification mark. This chain must not be used for overhead lifting.

3/8″ by 20′ Grade 70 Grab Hook Chain Assembly – Specifications:

  • Working Load Limit: 6,600 Lbs. / 3,000 Kgs.
  • Width: 3/8 Inches
  • Length: 20 Feet
  • Weight: 30.7 Lbs.
  • Grade of Chain: 70
  • Type of Hook: Clevis Grab

In stock

SKU: 3820G70 Categories: , Tags: , , , ,


Able to handle a working load limit of 6,600 Lbs. / 3,000 Kgs., our 3/8″ x 20′ Grade 70 Chain Assembly with Grab Hooks is the ideal chain assembly to use to keep your loads stable and secure.

Grade 70 transport chain is light enough to handle, yet strong enough to securely tie down your cargo. All Equipment Supply of Cincinnati grade 70 chain is made from carbon steel and zinc plated gold chromate for corrosion resistance. All grade 70 chain is made to NACM standards per specifications of the Department of Transportation & CCMTA for tie down use.

WARNING: Never over tension chain binders. Refer to product descriptions for proper tensioning accessories. Use of any unspecified leverage increasing device, such as a cheater bar, can generate enough force to break a piece of cargo control equipment during installation, release, or while in transit. The release of energy when a piece of cargo control equipment breaks can cause serious injury or death to you or bystanders. If you are having difficulty securing a load, make sure your cargo control equipment is in working order, or readjust or reposition your load. WLL ratings and strength standards for Equipment Supply chains are in compliance with National Association of Chain Manufacturers (NACM) Welded Steel Chain specifications. Do not exceed WLL ratings.


Additional information

Weight 30.7 lbs